Neoteck 2-in-1 Dual Probe Moisture Meter with LCD Display and Audio Alarm

About this item

• High-Accuracy Dual-Probe Design: Neoteck moisture meter combines a spherical pinless sensor and pin probe. Pinless mode enables non-destructive scanning of walls/floors/ceilings (40mm depth), using relative readings to rapidly compare and locate moisture concentration. Pin mode delivers high-precision (±2.5%) actual moisture measurement for wood (0-52%) and building materials (0-30%). Ideal for spot-checking lumber or structural elements
• Custom Thresholds & Pre-Set Ranges: Customize your pinless moisture meter's MOIST/WET alerts using suggested thresholds: Plaster/Anhydrite (DRY<30, MOIST 30-60, WET>60), Cement Materials (DRY<25, MOIST 25-50, WET>50), or Wood (DRY<50, MOIST 50-80, WET>80). For direct measurements, pin mode features fixed WOOD Mode alerts: DRY 5-11.9%, MOIST 12-19.9%, WET 20-52%; BLD Mode: DRY 2-7.9%, MOIST 8-11.9%, WET 12-30%
• Instant Visual & Audible Alerts: Neoteck moisture reader delivers clear warnings through color-coded LED: Green (DRY),Blue (MOIST),Red (WET)-paired with distinct audible alerts: Beep for MOIST conditions, rapid continuous beeping for WET levels. A dynamic bar graph visually tracks moisture progression while the mute function silences alarms when needed, retaining LED warnings for discreet inspections in sensitive environments
• Rechargeable with Utility Function: Moisture reader powered by a 1200mAh battery with USB-C charging for continuous operation. Auto power-off conserves energy after 30 minutes of inactivity. The HOLD function locks readings in vibrating environments, while the backlit LCD ensures clear visibility in dark spaces like attics or crawlspaces
• NOTE (Pinless Measurement): a. Must calibrate in air (>10cm from objects) when switching to Scan Mode, or readings are invalid. b.Press probe vertically flush against the surface. Avoid tilting, edges, or materials <5mm thick (may cause high/no readings). c. Avoid metal (nails/wires), salt, static, rough surfaces, or debris → clean measurement points for accuracy. d. Shows relative values only → compare multiple points to map moisture distribution. e.Cannot measure free water/surface film or display absolute moisture content
• NOTE (Pin Probe Measurement): a.Insert pins fully into wood/building materials at consistent depth. b. Measure wood across the grain (not parallel to rings) to avoid skewed readings from uneven insertion. c. Keep ≥5cm from edges to prevent false moisture detection. d. Accuracy may decrease on wood below -5°C

Overview

• Brand: Neoteck
• Battery Description: Rechargeable lithium battery (1200mAh), Type-C charging
• Upper Temperature Rating: 50 °C
• Number of Items: 1
• Manufacturer: Neoteck